Great Gifts for DIYers

Great Gifts for DIYers – If you’ve got a do-it-yourselfer on your list this holiday season, you’ve come to the right place. Here, we’ve gathered the perfect gifts for the Mr. or Mrs. Fix-it, or maker of things, in your life. From power and hand tools to mechanics’ tools—and even tools for electronics and computer repair, there is something for everyone. So, make your list and check it twice, but rest assured your favorite DIYer would love any—or all—of the products shown.  This article is brought to you from Monarc Technology – call us today at 214-507-3415 to talk about you home automation and technology needs. Great Gifts for DIYers

DeWalt Pin Nailer

Great Gifts for DIYers

DeWalt
$149.00

DeWalt recently introduced a new pin nailer that boasts the industry’s best combination of features, performance, and capabilities. (In case you’re wondering, a pin nailer is an air-powered tool that shoots super-thin headless nails, called pins. The 23-gauge pins are so tiny that you often don’t even have to fill the resulting holes with putty.)

Pin nailers are ideal for attaching thin wood edge banding, small-diameter moldings, cabinet trim, and picture frames. DeWalt’s nailer accepts pins ranging in length from ⅝ to 2 inches, which is pretty impressive considering that most pin nailers can shoot pins only up to about 1⅜ inch long. This is also the only pin nailer with a tool-free jam-release mechanism that allows you to quickly remove jammed pins without having to mess with a wrench or screwdriver.  Great Gifts for DIYers

WORX Cordless ExacTrack Circular Saw

Great Gifts for DIYers

Worx
$129.99

$101.10 (22% off)

Making long, perfectly straight cuts with a circular saw can be frustratingly difficult, unless you’ve got the new WORX Cordless ExacTrack Circular Saw. Built into the saw shoe is a guide that pivots up and out of the way, allowing you to clamp a straightedge directly on the cut line. There’s no need to measure the offset distance from the blade to the edge of the shoe. Simply raise the ExacTrack guide and steer the saw along the straightedge. The blade will then cut flush against the straightedge and right on the line.

Kreg KWS500 Track Horse

Kreg
amazon.com

This ain’t your grandfather’s track horse. Or even your father’s. The Kreg KWS500 is a versatile, portable, super-strong work support that’s made of sturdy steel and aluminum. Its four legs easily adjust to six different heights and fold flat for convenient storage and transport. The horizontal aluminum track has a keyhole slot that accepts a Kreg Bench Clamp or sacrificial 2×4 to protect the track when sawing and routing. And it can support an impressive 1,100 pounds.  Great Gifts for DIYers

Harugo 5000 Lumen Headlamp

Great Gifts for DIYers

Harugo

Say goodbye to weak headlamps. The Harugo 5000 leaves all of them in the dark with its three ultra-bright LED lamps that pump out an amazing 5,000 lumens of light. It has four brightness settings, an adjustable no-slip head strap, and a rear-mount battery pack that holds two lithium-ion batteries. The Harugo 5000 headlamp is ideal when working in the dark, but also for hiking, cycling, fishing, camping, hunting, and jogging.

Stanley Fatmax Power Inverter

Stanley
$24.97

$17.00 (32% off)

Keep powered up and fully charged while on the road with Stanley’s new 140-watt Power Inverter. The affordable, compact inverter has two AC outlets and a USB port. Simply plug the inverter into your vehicle’s 12-volt accessory outlet and you’re ready to run and recharge cell phones, tablets, laptops, handheld gaming devices, and nearly any other electronic devices you can fit in the car. It comes with a mounting kit for easily attaching the inverter to your vehicle.  Great Gifts for DIYers

Dremel Digilab 3D20 3D Printer

Courtesy
amazon.com

$598.99

Has the Do-It-Yourselfer on your list been pining to get her start 3-D printing? Prices have come way down, and this Digilab 3D20 3D printer comes from a brand you know and trust, Dremel. Print things up to a max of 5.9 inches deep x 9 inches high x 5.5 inches wide, with PLA filament

 

PortaMate Wood Organizer and Lumber Storage

Portamate
$65.00

$35.99 (45% off)

Floor space is a premium for any DIYer. Scrap wood that they will use some day frequently lurks propped up in garage corners, just waiting for the right vibration or bump so that it can fall on and scratch up the car. The PortaMate gives you six sets of brackets to organize lumber, or you can add your own wooden shelves and store anything you want. It can hold up to 600 pounds. Best of all, the slim profile means it will fit in most garages without taking up the space you need for your car.  Great Gifts for DIYers

BobsCNC E3 CNC Router Engraver Kit

Courtesy
amazon.com

$698.00

If the maker on your list works in wood—look no further than Bob’s CNC Router. It moves in the X, Y, and Z axes to route signs, cut out shapes, or carve a design in relief. The laser-cut frame comes ready-to-assemble with a DeWalt router, all the mechanicals, and a micro-processor.

This article is brought to you from Monarc Technology – call us today at 214-507-3415 to talk about you home automation and technology needs.  Great Gifts for DIYers